AltiGen MAXCS 7.5 Softswitch Deployment Guide - Manual (Page 32)

Page 32 of 37 MAXCS 7.5 All-Software Solution Deployment Guide
4. Copy that configuration to the rest of the first half of the channels:
a. Select the first channel and click Copy To.
b. Select the range of channels from the second channel through the end of the channels that belong
with the first server. Do not include ChannelB or any channels beyond ChannelB. For the
scenario in our example, you would copy the configuration of channel 00 to channels 01 through
09. Click OK.
5. Update the first channel to specify a registration period other than 0, so that this trunk will send a
registration message to the carrier:
a. Select the first SIP Trunk channel again. Click
Edit.
b. Change the SIP Register Period setting to 60. Click OK.
Configure the Second Half of the Channels
Now you will configure the second half of the channels, which will be assigned to the second server. This
process is almost identical to the previous step, except that you are using the “Secondary” SIP details (from the
order in the Cloud Services portal) instead of the details for the first sever.
1. Select the first channel of the second half (ChannelB). Click Edit.
2. Set the following parameters and then click OK.
• For SIP Server IP Address, enter the IP address of the second SIP trunk server, 74.81.71.18. This
is different from the IP address for the first set of channels.
• For User Name, paste the same string as for the first set of channels. In our example, this is
5812129034.