AERCO RECON 1000 - Manual (Page 136)

RECON Water Heaters Installation, Operation & Maintenance Manual
APPENDIX A – RECON MENU ITEM DESCRIPTIONS
Page 136 of 178 AERCO International, Inc.  100 Oritani Dr.  Blauvelt, NY 10913 OMM-0103_0A
PRI: 10/28/2014 Phone: 800-526-0288 GF-147
Table A-2: Setup Menu Item Descriptions
Table A-2: SETUP MENU ITEM DESCRIPTIONS
See section 3-5 for a range of choices and the default values.
MENU LEVEL & OPTION DESCRIPTION
1 Password
Allows password to be entered.
Once the valid password (159) is entered, options in the
Setup, Configuration and Tuning Menus can be modified.
2 Language English only
3 Time Displays time from 12:00 am to 11:59 pm.
4 Date Displays dates from 01/01/00 to 12/31/99
5 Unit of Temp
Permits selection of temperature displays in degrees
Fahrenheit (°F) or degrees Celsius (°C).
6 Comm Address
For RS-485 communications (0 to 127). Default address is 0.
RS232 should have its own (programmable) password.
7 Baud Rate Allows communications Baud Rate to be set (2400 to 19.2K).
8 OnAER Mode
Allows the selection of On AER data destination medium
between Ethernet and SD Card
9 Min Upload Timer Sets the time between On AER Heartbeat data transmissions
10 Unit Alpha Sets the Alpha portion of a unit serial number
11 Unit Year Sets the Year portion of a unit serial number
12 Unit Serial # Sets the Number portion of a unit serial number
13 Software Version
Identifies the current software version of the control box (Ver
0.0 to Ver 9.9).