8 relay setting – AVerMedia Technologies NV 5000 User Manual
Page 96
AVerMedia NV1000/3000/5000/7000 User’s Manual
3.2.8 Relay Setting
Click
to set up relays.
1. Relay ID
Assign a relay by clicking the drop-down menu
, and enter its
name in the name field.
2. Enable
Tick
to enable this relay. Cancel the tick to disable the relay.
3. Content
After you enable the appointed relays, the system will automatically show the
Card No. and Input No. in the following Content column. You can see the
following illustration of the relay inputs. Enter the comment in the blank.