AVerMedia Technologies NV 5000 - Manual (Page 129)

Chapter 4 Using the System
130
D. Determine a Preset Name for the position.
E. Click Save to keep the setting.
After you finish the above steps, repeat the same procedure to setup another
PTZ camera until you finish all PTZ cameras. Click to finish the
setting or to cancel it.
After the settings, you can start to use the PTZ controller.
9
4 5
6
8
10
11
1
2
7
3
1. PTZ Setup. Click to configure PTZ cameras. After the settings, you can
start to use the PTZ controller.
2. Zoom in / Zoom out. You can click / to size up / to size down the
image. These buttons provide the function to adjust the focal distance of lens
to size up / to size down the image.
3. Focus in / Focus out. Click / to adjust the focus to produce a clear
image.
4. Camera Number. The white number inside the controller represents the PTZ
camera number.
5. Direction buttons. You can use the 8 direction buttons to adjust the