AVerMedia Technologies NV 5000 - Manual (Page 103)

Chapter 3 Configuring the System
104
and Password.
ID and Password: Enter your ID and password of SMTP server so that the
system can send the alarm by E-mail.
B. Mail
From: Enter the mail sender’s E-mail address.
To: Enter the main receivers’ email address.
CC: Enter the copy list of mail receivers.
Subject: Enter the E-mail title.
Message: Enter the message.
Click to save the setting or to cancel the setting.
Files Transmission via FTP: Click to setup the FTP settings.
You will see the FTP setting dialog.
FTP Server: Enter the FTP server IP.
Port: Enter the port of FTP protocol.
ID: Enter your ID for FTP server.
Password: Enter the password.
Click OK to finish the settings. If you cannot enter the information by
keyboard, click
to enter the information.
Start Recording: Tick the box to enable Record. Click to
select cameras, and set post-alarm recording time.