IEI Integration UPC-12AH_GM45 v1.00 - Manual (Page 62)

UPC-12A/GM45 Panel PC
Page 50
Figure 4-16: Wall-mounting Bracket
Step 6: Insert the four monitor mounting screws provided in the wall mounting kit into the
four screw holes on the real panel of the monitor and tighten until the screw
shank is secured against the rear panel (
562H562H
Figure 4-17 ).
Step 1: Align the mounting screws on the monitor rear panel with the mounting holes on
the bracket.
Step 2: Carefully insert the screws through the holes and gently pull the monitor
downwards until the monitor rests securely in the slotted holes (
563H563H
Figure 4-17 ).
Ensure that all four of the mounting screws fit snuggly into their respective
slotted holes.
NOTE:
In the diagram below the bracket is already installed on the wall.