IEI Integration UPC-12AH_GM45 v1.00 - Manual (Page 113)

UPC-12A/GM45 Panel PC
Page 101
Î Spread Spectrum Mode [Disabled]
Use the Spread Spectrum Mode option to reduce the EMI. Excess EMI is generated
when the system clock generator pulses have extreme values. Spreading the pulse
spectrum modulates changes in the extreme values from spikes to flat curves, thus
reducing the EMI. This benefit may in some cases be outweighed by problems with
timing-critical devices, such as a clock-sensitive SCSI device.
Î
Disabled D EFAULT
EMI not reduced
Î
Enabled EMI reduced
6.8 Exit
Use the Exit menu (
614H614H
BIOS Menu 20 ) to load default BIOS values, optimal failsafe values
and to save configuration changes.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Exit
Exit Options
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
Save Changes and Exit
Discard Changes and Exit
Discard Changes
Load Optimal Defaults
Load Failsafe Defaults
Exit system setup after
saving the changes.
F10 key can be used for
this operation
ÅÆ Select
Screen
↑ ↓ Select
Item
Enter Go to SubScreen
F1 General
Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 20:Exit
Î Save Changes and Exit
Use the Save Changes and Exit option to save the changes made to the BIOS options
and to exit the BIOS configuration setup program.