IEI Integration UPC-12AH_GM45 v1.00 User Manual
Page 126
UPC-12A/GM45 Panel PC
Page 114
Step 2:
In a remote computer, install the IEI REMOTE AP. Double click the setup.exe file
in the x:\AUPS\AUPS REMOTE AP directory. Follow the steps to install the IEI
REMOTE AP. After installation, launch the AP. If there is a problem to launch the
tool, execute the dotnetfxRedist20.exe first (located in the same directory of the
driver CD).
Step 3:
The IEI REMOTE AP tool appears (
630H630H
Figure 7-17
). All the UPC-12A/GM45 panel
PCs in the same subnet with this remote computer are shown in the list on the
right. Click the function buttons on the left to control the UPC-12A/GM45.
Figure 7-17: IEI REMOTE AP
Step 4:
To access the web interface for advanced monitoring and functions, double click
the IP address of the connected UPC-12A/GM45 (
631H631H
Figure 7-18
).