IEI Integration UPC-12AH_GM45 v1.00 - Manual (Page 49)

UPC-12A/GM45 Panel PC
Page 37
Connect the HDD to the SATA cable connector.
Step 5: Secure the HDD . Align the four retention screw holes on the both side of the
HDD with the retention screw holes of the HDD bracket. Insert four retention
screws into the both sides of the HDD bracket to secure the HDD to the HDD
bracket. See
540H540H
Figure 4-4 .
Figure 4-4: Secure the HDD with the HDD Bracket
Step 6: Install the HDD. Correctly align the four retention screw holes on the HDD
bracket with the retention screw holes on the aluminum chassis. Insert four
previously removed retention screws to secure the HDD bracket to the chassis.
See
541H541H
Figure 4-5 .