IEI Integration UPC-12AH_GM45 v1.00 - Manual (Page 46)

UPC-12A/GM45 Panel PC
Page 34
„ Anti-static Discharge : If a user open the rear panel of the panel PC, to
configure the jumpers or plug in added peripheral devices, ground themselves
first and wear and anti-static wristband.
4.3 Preinstalled Components
The following components are all preinstalled.
„ Motherboard
„ TFT LCD screen
„ DDR2 memory module
„ Resistive type touch screen
„ Stereo speakers
Preinstalled OEM customizations may include the following.
„ Different DDR2 memory module
„ Hard disk drive
„ CF card
Component installation is described in the following sections.
4.4 Installation and Configuration Steps
The following installation steps must be followed.
Step 1: Unpack the panel PC
Step 2: Install the HDD
Step 3: Install the battery
Step 4: Install the PCIe mini wireless card
Step 5: Install the PCI expansion card
Step 6: Configure the system
Step 7: Mount the system