IEI Integration UPC-12AH_GM45 v1.00 - Manual (Page 111)

UPC-12A/GM45 Panel PC
Page 99
Î Boots Graphics Adapter Priority [IGD]
Use the Boots Graphics Adapter Priority option to select the graphics controller used as
the primary boot device. Select either an integrated graphics controller (IGD) or a
combination of PCI graphics controller, a PCI express (PEG) controller or an IGD.
Configuration options are listed below:
„ IGD D EFAULT
„ PCI/IGD
Î Internal Graphics Mode Select [Enabled, 32MB]
Use the Internal Graphic Mode Select option to specify the amount of system memory
that can be used by the Internal graphics device.
Î
Disabled
Î
Enabled, 32MB D EFAULT
32 MB of memory used by internal graphics device
Î
Enabled, 64MB 64 MB of memory used by internal graphics device
Î
Enabled, 128MB 128 MB of memory used by internal graphics
device
Î Boot Display Device [Auto]
Use the Boot Display Device BIOS feature to determine what displays are used. Dual
display functionality is enabled here. Dual display configuration options are listed below:
„ Auto D EFAULT
„ CRT
„ LVDS
Î Flat Panel Type [BY HARDWARE]
Use the Flat Panel Type to determine the LCD panel resolution. Configuration options are
listed below: