IEI Integration UPC-12AH_GM45 v1.00 - Manual (Page 48)

UPC-12A/GM45 Panel PC
Page 36
Figure 4-2: HDD/Battery Access Panel Retention Screws
Step 2: Locate the HDD slot in the UPC-12A/GM45.
Step 3: Remove the HDD bracket. The HDD bracket is secured to the aluminum
chassis by four retention screws (
538H538H
Figure 4-3 ). To remove the HDD bracket,
please remove the four retention screws.
Figure 4-3: HDD Bracket Retention Screws
Step 4: Place one 2.5” SATA HDD onto the HDD bracket as shown in
539H539H
Figure 4-4 .