Intermec 700 - Manual (Page 383)

Configurable Settings Appendix — A
359 700 Series Color Mobile Computer User’s Manual
Identification
To access the settings from the 700 Color Computer, tap Start > Settings
> the System tab > SNMP > the Identification tab to access its
parameters.
The following are parameters for contact, location, and name information
for support purposes. Note that these are listed in the order of their appear-
ance within the Identification tab.
Contact
Sets the contact information for the person responsible for this 700 Color
Computer.
Action
Tap the Contact parameter, then enter the name of your contact represen-
tative to change this parameter setting.
SNMP OID
1.3.6.1.2.1.1.4.0
Options
The identification contact may be up to 255 ASCII characters. Default is
no characters or blank.