For units with psm build 3.00 or newer – Intermec 700 User Manual
Page 34
Introduction
Chapter
—
1
10
700 Series Color Mobile Computer User’s Manual
For Units With PSM Build 3.00 or Newer
To select a beeper volume for the 700 Color Computer, tap Start > Set-
tings > the System tab > the Intermec Settings icon. Tap the Device Set-
tings option, tap (+) to expand Beeper, then tap (+) to expand Volume.
Select an item, then close this option.
700 Color Screen
730 Screen
Note: Information about the settings you can configure with the Intermec
Settings control panel applet is in the Intermec Computer Command Refer-
ence Manual (P/N: 073529) available online at www.intermec.com.