beautypg.com

Select a beeper volume, For units with psm builds older than 3.00 – Intermec 700 User Manual

Page 33

background image

Introduction

Chapter 1

9

700 Series Color Mobile Computer User’s Manual

Select a Beeper Volume

Note: The 730 Computer does not support the laser scanner.

To determine your PSM Build version, tap Start > Programs > File Ex-
plorer
> the Flash File Store folder > the PSMinfo text file.

For Units With PSM Builds Older than 3.00

Do the following to select a beeper volume. 700 Color Computers built
with a laser scanner have three options: Off, High, or Medium. 700
Computers built with an imager have just two: Beeper or Vibrate. 730
Computers have just the Beeper option. See Appendix A, “Configurable
Settings
,” for more information about the Beeper Volume or Beeper
option.

1

Tap Start > Settings > the System tab > the Data Collection icon to
access its control panel applet.

2

Use the right and left arrows to scroll to the Beeper/LED tab, then tap
this tab.

3

For units with laser scanners:
Tap Beeper Volume, select an option, then tap Apply to change the set-
ting.

For units with imagers:
Select either option, then tap Apply to change the setting. For 730 Com-
puters, the Vibrate option is not supported.

4

Tap ok to confirm this change, then tap ok to exit the Data Collection
control panel applet.

700 Color with Imager Screen

730 Screen

700 Color with Laser Scanner

Screen