Intermec 700 - Manual (Page 365)

Configurable Settings Appendix — A
341 700 Series Color Mobile Computer User’s Manual
Lighting Mode
The Lighting Mode sets the lighting mode of the imager. When set to
“LED Priority,” the imager depends more on ambient lighting to illumi-
nate the bar code for reading. When set to “Aperture Priority,” the imager
uses its built-in LED to illuminate the bar code for reading. Note that this
is not available when you use a laser scanner with your 700 Color Computer.
Action
Tap the Lighting Mode parameter, then select an option to change this
parameter setting.
SNMP OID
1.3.6.1.4.1.1963.15.3.3.3.1.1.23.1
Options
0 LED Priority (default)
1 Aperture Priority