Intermec 700 - Manual (Page 336)

Configurable Settings Appendix — A
312 700 Series Color Mobile Computer User’s Manual
Plessey
Plessey is a pulse-width modulated symbology like most other bar codes. It
includes a start character, data characters, an eight-bit cyclic check digit,
and a termination bar. The code is continuous and not self-checking. You
need to configure two parameters for Plessey code: Start Code and Check
Digit. Note that this is not available when you use an imager with your 700
Color Computer.
Action
Tap (+) to expand the Plessey parameter, select the setting to be changed,
then select an option to change this setting or select an option from the
drop-down list.
SNMP OID
1.3.6.1.4.1.1963.15.3.3.1.1.10.1
Options
Decoding 0
1 Not active (default)
Active
Check digit 0
1 Not transmitted (default)
Transmitted
Bar code length 0
1 Any length
Minimum length (default)
Minimum length 001–254 Minimum length 1–254 (default is 6)
Note: If Bar code length = “1” then Minimum length is entered.