Furuno FS-5070 - Manual (Page 94)

5. ROUTINE MESSAGE CALLING, RECEVING
5-34
The timer counts down to zero and then the following display appears.
Pick up the handset
or press CALL key.
TIME TO GO: 60S RESENDING
DESTINATION ID : 001234567
TEL NO.
TELEPHONE: 2222.2kHz : 1234567890123456
DSC FREQ : 4208.0 KHZ
1. Pick up the handset or press the CALL key within one minute.
PSTN connection
message in progress!
TIME TO GO: 7S
DESTINATION ID : 001234567
TEL NO.
TELEPHONE: 2222.2kHz : 1234567890123456
DSC FREQ : 4208.0 KHZ
The timer counts down to zero and then the following display appears.
Waiting for
acknowledgement.
TIME TO GO: 25S RESENDING
DSC FREQ : 2222.2 KHZ
SENDER ID : 001234567
TEL NO.
TELEPHONE: 2222.2kHz : 1234567890123456
Shortly thereafter, one of the following messages appears.
PSTN connected.
DSC FREQ : 4208.0KHZ
DESTINATION ID : 001234567
TEL NO. : 1234567890123456
PSTN call connected PSTN end of call
PSTN end of
message in progress!
TIME TO GO: 7S
DESTINATION ID : 001234567
TEL NO. : 1234567890123456
DSC FREQ : 4208.0KHZ
TELEPHONE : 2222.2 kHz
2. Do one of the following depending on the message shown at step 5. Note that volume
can be adjusted in this condition. Rotate the PWR/VOL knob.
PSTN connected: Communicate with party.
PSTN end of message in progress!: The channel could not be used. Press the CANCEL
key to return to the DSC standby screen.