Furuno FS-5070 - Manual (Page 102)

6. MENU OPERATION
6-4
6.4.2 Deleting user channels
Deleting individual user channels
1. Press the #/SETUP key.
2. Rotate the ENTER knob to choose USER CH and then push the ENTER knob twice.
3. Rotate the ENTER knob to choose CH and then push the ENTER knob.
4. Key in the channel number to be deleted, and then push the ENTER knob.
5. Tx and Rx frequencies are shown as “0.0 kHz”; push the ENTER knob to delete
channel.
6. Press the CANCEL key twice to return to the radiotelephone screen.
Deleting all user channels
1. Press the #/SETUP key.
2. Rotate the ENTER knob to choose MEM CLR and then push the ENTER knob.
3. Rotate the ENTER knob to choose USER CHANNELS and then push the ENTER knob.
4. Rotate the ENTER knob to choose YES and then push the ENTER knob.
5. Press the CANCEL key twice to return to the radiotelephone screen.
6.5 Preparing TX Message
For the individual, PSTN, Group and Test messages, you can create messages and store
them in the memory for future use. You can recall these messages, for editing or sending,
with the */FILE/CURSOR key. Maximum 100 messages can be stored into the memory.
6.5.1 Preparing individual calls
1. Press the #/SETUP key to open the setup menu.
2. Rotate the ENTER knob to choose MESSAGE.
3. Push the ENTER knob.
4. Push the ENTER knob to open the MSG TYPE menu.
* Message file entry
MSG TYPE
STATION ID
COMM MODE
COMM FREQ
DSC FREQ
: INDIVIDUAL
: ---------
: TELEPHONE
: NO INFO
: 2M-INTL
INDIVIDUAL
PSTN MESSAGE
TEST MESSAGE
GROUP MESSAGE
5. Rotate the ENTER knob to choose INDIVIDUAL and then push the ENTER knob.