Furuno FS-5070 - Manual (Page 119)

6. MENU OPERATION
6-21
Routine frequencies
1. Rotate the ENTER knob clockwise to shift the cursor to the ROUTINE column.
DISTRESS
2M :
FIXED
4M : ON
6M : ON
8M :
FIXED
12M : ON
16M : OFF
** Scan freq setup *
ROUTINE
F1 : 2M-INTL
F2 : 4M-INTL
F3 : 6M-INTL
F4 : 8M-INTL
F5 : 12M-INTL
F6 : 16M-INTL
2. Rotate the ENTER knob to choose the frequency band. For example, choose F1.
ROUTINE
F1 : 2M-INTL
F2 : 2M-USR3
F3 : 4M-INTL
F4 : 8M-INTL
F5 : 16M-LCL1
F6 : 25M-LCL2
DISTRESS
2M :
FIXED
4M : ON
6M : ON
8M :
FIXED
12M : ON
16M : OFF
** Scan freq setup *
OFF
2 MHZ
4 MHZ
6 MHZ
8 MHZ
3. Rotate the ENTER knob to choose a frequency to set.
4. Push the ENTER knob, and the display looks something like the one below.
ROUTINE
F1 : 2M-INTL
F2 : 2M-USR3
F3 : 4M-INTL
F4 : 8M-INTL
F5 : 16M-LCL1
F6 : 25M-LCL2
DISTRESS
2M :
FIXED
4M : ON
6M : ON
8M :
FIXED
12M : ON
16M : OFF
** Scan freq setup *
INTL : T 2189.5/R 2177.0
DIST : T2187.5/R 2187.5
User channel appears if registered.
5. Rotate the ENTER knob to choose frequency desired and then push the ENTER knob.
INTL: International channels
DIST: Distress channels
LOCAL1/LOCAL2: Local channels
USER: User channel
6. Press the CANCEL key three times to return to the radiotelephone screen.
Note: Distress frequencies can be stored on the routine frequency memory. This is
convenient for backing up the watch-keeping receiver.