Furuno FS-5070 - Manual (Page 69)

5. ROUTINE MESSAGE CALLING, RECEVING
5-9
* Xmitted message *
JUL-23-2006-23:01
UNABLE ACKNOWLEDGE
RESEND
BUSY
DESTINATION ID : 121234567
PRIORITY : ROUTINE
10M10S
GO TO VIEW
2. Push the ENTER knob to confirm the message.
3. Rotate the ENTER knob to scroll the message.
Manually acknowledging individual call with “ABLE”
When an individual call is received and the equipment is set up with manual acknowledge
(MANUAL ACK), the alarm sounds and the display looks like the one below.
Individual routine
message received.
TELEPHONE CH 401
Ack Required.
CANCEL: STOP ALARM
1. Press the CANCEL key to silence the alarm. The display changes as shown below.
MAR-23-2006-23:00:00
INDIVIDUAL REQUEST
SENDER ID: 001234567
PRIORITY: ROUTINE
TELEPHONE CH 401
Received message
ANSWER GO TO VIEW
10M10S
To view contents, rotate ENTER knob
to choose GO TO VIEW and then push
ENTER knob.
2. Rotate the ENTER knob to choose ANSWER and then push the ENTER knob.
3. Rotate the ENTER knob to choose MSG TYPE and then push the ENTER knob.
STATION ID : 001234567
COMM MODE : TELEPHONE
COMM FREQ
: CH 401
MSG TYPE : ABLE
ACKNOWLEDGEMENT
DSC FREQ : 4M-INTL
GO TO VIEW
ABLE
UNABLE
Compose msg.
4. Rotate the ENTER knob to choose ABLE and then push the ENTER knob. The display
changes as below.