Furuno FS-5070 - Manual (Page 83)

5. ROUTINE MESSAGE CALLING, RECEVING
5-23
6. When you have finished sending your message, press the F10 key to disconnect the
line.
5.5.2 Receiving a medical transport call
When a medical transport call is received, the alarm sounds and the display changes as
below.
SENDER ID: 123456789
PRIORITY: URGENCY
TELEPHONE 2182.0 KHZ
Medical transport
message received.
CANCEL: STOP ALARM
1. Press the CANCEL key to silence the alarm. After the “Change COM Frequency” display,
the display changes as below.
GO TO ALL VIEW
Received message
MAR-23-2006-23:59
MEDICAL TRANSPORT
SENDER ID: 123456789
PRIORITY: URGENCY
TELEPHONE 2182.0 kHz
GO TO VIEW
10M10S
2. Press the CANCEL key to go to the radiotelephone screen to watch on frequency
specified. If there is the difference between the registered frequency and used frequency
to receive, the following screens appear. Choose Agree for the voice communication, or
Disagree when you do not change the frequency.
After 10 seconds passed or when "Agree" is chosen,
the working frequency is changed with the message
shown below.
Choose "Pause".
Accept New
Working Freq
CANCEL: CLOSE WINDOW
Choose "Agree".
Change COM Frequency
Agree Disagree
Count down has been paused.
Change COM Frequency
Agree Disagree
Count down xx sec. Pause