Furuno FS-5070 - Manual (Page 80)

5. ROUTINE MESSAGE CALLING, RECEVING
5-20
8. Press the CALL key to send the neutral craft call (transmission time: approx. 7 sec.).
Neutral craft
message in progress!
PRIORITY: URGENCY
TIME TO GO: 7S
DSC FREQ : 2187.5 kHz
AREA : 34 N 140 W 10 5
9. After the call is sent, press the CANCEL key twice to show the radiotelephone screen.
10. Inform all ships by radiotelephone that your ship is not a participant in armed conflict.
Sending message by NBDP Terminal Unit
The message “STATION ENTRY COMPLETED FROM DSC. Press any key to escape.”
Appears on the NBDP’s display.
1. Press any key on the NBDP Terminal Unit to erase the message.
2. Press the function key F3 on the keyboard of the NBDP Terminal Unit to show the
Operate menu.
3. Choose “Call Station” and then press the Enter key.
4. “DSC” is selected; press the Enter key. “Connect” appears in reverse video.
5. Type and transmit your message.
6. When you have finished sending your message, press the F10 key to disconnect the
line.
5.4.2 Receiving a neutral craft call
When a neutral craft call is received the alarm sounds and the display changes as below.
SENDER ID: 123456789
PRIORITY: URGENSY
TELEPHONE 2182.0 kHz
Neutral craft
message received.
CANCEL: STOP ALARM
1. Press the CANCEL key to silence the alarm. The working frequency confirmation
window appears for 10 seconds. The display changes as below.
Received message
MAR-23-2006-23:59
NEUTRAL CRAFT
SENDER ID: 123456789
PRIORITY: URGENCY
TELEPHONE 2182.0 kHz
GO TO VIEW
10M10S