Furuno FS-5070 - Manual (Page 60)

4. DISTRESS OPERATIONS
4-22
2. Choose CANCEL and push the ENTER knob to cancel the distress call.
TIME TO GO : 0S
NATURE: UNDESIGNATED
POS: 12 34.5678N
123 45.6789E
DSC FREQ :
2187.5 kHz
Warning:
Distress Cancel Step
YES NO
3. Rotate the ENTER knob to choose YES, and then push the ENTER knob to show the
following screen. The screen shows the used frequencies to send.
NATURE: UNDESIGNATED
POS: 12 34.5678N
123 45.6789E
Distress Cancellation Proc.
Select frequency
and push ENTER.
Cancel: Back to pause menu.
2M-2187.5 kHz 8M-8414.5kHz
4M-4207.5kHz 12M-12577.0kHz
6M-6312.0kHz 16M-16804.5kHz
4. Rotate the ENTER knob to choose the frequency which was used to send, and then
press the ENTER knob.
The cancellation message is transmitted over the same frequency used to transmit the
distress call.
NATURE: UNDESIGNATED
POS: 12 34.5678N
123 45.6789E
Now Transmitting Distress
Cancellation Message
2M-2187.5 kHz 8M-8414.5kHz
4M-4207.5kHz 12M-12577.0kHz
6M-6312.0kHz 16M-16804.5kHz
5. When the following screen appears, communicate with all ships via radio telephone.
NATURE: UNDESIGNATED
POS: 12 34.5678N
123 45.6789E
Send cancel msg. by voice
on 2182.0 kHz.
Push any key: Go next step.
*2M-2187.5 kHz 8M-8414.5kHz
4M-4207.5kHz 12M-12577.0kHz
6M-6312.0kHz 16M-16804.5kHz
Asterisk marks the frequency over which
the cancellation call was transmitted..
6. Press any key.
If you used other frequencies to send the distress call, the Distress Cancel sending
starts over the next frequency to yourself. In this case, repeat step 3.
7. Repeat steps 4 through 6 to cancel for all frequencies.
When all cancellation is completed, the RT display appears.