Furuno FS-5070 - Manual (Page 121)

6. MENU OPERATION
6-23
6.16 FAX Enable/Disable
You may enable or disable FAX use as follows. This setting is necessary when the facsimile
is connected and used to receive.
1. Press the #/SETUP key.
2. Rotate the ENTER knob to choose USR SETUP, and then push the ENTER knob.
3. Rotate the ENTER knob to choose FAX Rx and then push the ENTER knob.
4. Rotate the ENTER knob to choose ENABLE or DISABLE as appropriate and then push
the ENTER knob.
When choosing ENABLE, “FAX” is added to the emission mode.
SSB SIMP HIGH FAST NB SQ
SEN S
LA 10.0A
MMSI xxxxxxxxx
35 00.0000N
135 00.0000E
CH: 200
Tx: 2182.0 kHz
Rx: 2182.00 kHz
UTC 00:00
EPFS 23:59
SEN
LA
Emission mode
TLX
FAX
AM
SSB
5. Press the CANCEL key twice return to the radiotelephone screen.
6.17 Speaker Setting in Off Hook
When the handset is off hook, you may choose to turn the speaker (panel speaker or
external speaker) on or off. The default setting is OFF, which turns off the speaker when the
handset is off hook. The ON position keeps the speaker on always, regardless of handset
state.
1. Press the #/SETUP key.
2. Rotate the ENTER knob to choose USR SETUP and push the ENTER knob.
3. Rotate the ENTER knob to choose HOOK SP OFF, push the ENTER knob.
4. Rotate the ENTER knob to choose ON or OFF as appropriate, and push the ENTER
key.
6.18 Operation Timer Off
When the screen which cannot receive the DSC message is active more than 10 minutes
without any operation, the control unit returns to the radiotelephone screen automatically.
You can enable/disable this function as below:
1. Press the #/SETUP key.
2. Rotate the ENTER knob to choose USR SETUP and push the ENTER knob.
3. Rotate the ENTER knob to choose TIMER, push the ENTER knob.
4. Rotate the ENTER knob to choose 10MIN or OFF as appropriate, and push the ENTER
knob.