Furuno RC-1500-1T - Manual (Page 44)

2-4
2.4 Panel Backlighting, LCD Contrast and
Brightness
1. At the DSC standby screen or radiotelephone setting screen, press the [9/ ] key. The
following display appears.
EXIT:[ENT]
8
29
DIMMER (1~8)
CONTRAST (0~63)
2. Use to increase the panel backlighting, LCD brightness; to lower it. Current
backlighting setting is shown in both digital and analog indications below DIMMER.
3. Use to lower the LCD contrast; to raise it. Current contrast setting is shown in both
digital and analog indications below CONTRAST.
4. Press the [ENT] key to finish and return to the screen previously in use.