Furuno RC-1500-1T - Manual (Page 138)

6-8
* Message file entry
CALL TYPE:
COAST ID
TEL NO. :
PSTN CALL
001234567
1234567890 ---
DSC FREQ : 2M-INTL TL
6 MHZ
8 MHZ
12 MHZ
4 MHZ
2 MHZ 16 MHZ
18 MHZ
22 MHZ
25 MHZ
OTHER
MANUAL
Use to scroll
menu.
OTHER: Special, private channels.
MANUAL: For selection of frequency at
radiotelephone when there is "remote control
error."
10. Select appropriate DSC band and press the [ENT] key. Select DSC frequency and press the
[ENT] key.
11. Follow “How to Enter File Name and Number” on page 6-3 to enter file name and number.
6.5 Preparing Test Call Messages
3. Press the [#/SETUP] key to open the Setup menu.
4. Select MESSAGE and press the [ENT] key.
5. Press the [ENT] key to open the CALL TYPE menu.
* Message file entry
CALL TYPE
STATION ID
COM. TYPE
COM. FREQ
DSC FREQ
: INDIVIDUAL
: ---------
: TELEPHONE
: NO INFO
: 2M-INTL
INDIVIDUAL
PSTN CALL
GROUP CALL
AREA CALL
TEST CALL
4. Select TEST CALL and press the [ENT] key.
5. Press the [ENT] key to open the COAST ID menu.
GO TO ALL VIEW
* Message file entry
CALL TYPE
PRIORITY
DSC FREQ : 2187.5 KHZ
: TEST
: SAFETY
COAST ID 000000000
How to input coast ID automatically
If you have previously registered some coast IDs,
you can insert them into your message as follows:
1. Press the [FILE] key after completing step 4 in the
above procedure. The following display appears.
2. Select file which contains ID you want to use
(press
"
to show ID number).
3. Press the [ENT] key to insert ID number in message.
Test ID file
300. FURUNO "
500. MARINE
"
777. ELECTRIC "
Note: You can print the
Test ID file list by pressing
the [8/PRINT] key.
#
UP
$
DOWN