Furuno RC-1500-1T - Manual (Page 110)

4-34
4.8.1 Position call: requesting other ship’s position
1. Press the [CALL] key, and press the [ENT] key to open the CALL TYPE menu.
If this part of menu appears,
use
#
to scroll menu. *** Send message ***
STATION ID
PRIORITY
DSC FREQ
INDIVIDUAL
PSTN CALL
TEST CALL
ALL SHIPS
GROUP CALL
AREA CALL
$
RELAY SEL
POLLING
NEUTRAL
MEDICAL
RELAY ALL
DISTRESS
#
POSITION
CALL TYPE
2. Use or to select POSITION and press the [ENT] key.
3. Press the [ENT] key to open the STATION ID menu.
CALL TYPE:
PRIORITY
DSC FREQ
POSITION
REQUEST
: ROUTINE
:2M-INTL
GO TO ALL VIEW
*** Send message ***
- - - - - - - - -
STATION ID
4. Key in ID of station (nine digits) of which you want their position and press the [ENT] key.
5. Press the [ENT] key to open the PRIORITY menu.
CALL TYPE
STATION ID
DSC FREQ
: Position
request
: 987654321
: Routine
:12M-INTL
GO TO ALL VIEW
*** Send message ***
BUSINESS
SAFETY
URGENCY
ROUTINE
PRIORITY
6. Select priority desired (usually ROUTINE) and press the [ENT] key.
7. Press the [ENT] key to open the DSC FREQ menu.
CALL TYPE : POSITION
REQUEST
STATION ID : 987654321
PRIORITY : ROUTINE
*** Send message ***
GO TO ALL VIEW
DSC FREQ : 2M-INTL
6 MHZ
8 MHZ
$
12 MHZ
4 MHZ
2 MHZ
16 MHZ
18 MHZ
22 MHZ
25 MHZ
OTHER
MANUAL
Use to scroll
menu.
OTHER: Special, private channels.
MANUAL: For selection of frequency at
radiotelephone when there is "remote control
error."
8. Select appropriate DSC band and press the [ENT] key. Select DSC frequency and press the
[ENT] key. (See page 4-8 for details.)