Furuno RC-1500-1T - Manual (Page 191)

3-5
4. Do one of the following;
Edit station: Use [ ], [ ] and the [Backspace] key to make
corrections.
Delete station: Erase station name with the [Backspace] key.
5. Press the [Enter] key twice.
6. Press the [Esc] key.
3.3 Timer Programming
A built-in timer allows you to automatically receive and transmit
files. 10 timer programs can be registered.
Registering Timer Programs
1. Press function key [F5]. Press the [2] key to select Timer Op-
eration Entry. The screen should look something like Figure 3-
7.
Create
Change
Timer Operation Entry
Timer Operation List
Timer Operation Set Up
Operation :
Station :
Start Time : 0: 0: 0
Stop Time : 0: 0: 0
Receive/Send : Receive Send
File to Send :
Figure 3-7 Timer operation entry screen
2. If Create is not underlined, press [ ], [ ] and the [Enter] key
to underline it.
3. Enter a suitable operation name on the Operation line. Any
alphanumeric characters may be used. See note 2 on the next
page.
4. Place the cursor on the Station line. Press the [ ] key to dis-
play the Station List. Select a station and press the [Enter] key.