Furuno RC-1500-1T - Manual (Page 135)

6-5
* Message file entry
CALL TYPE:
GROUP ID
COM. TYPE
COM. FREQ
DSC FREQ
GROUP CALL
: 012345678
: TELEPHONE
: NO INFO
: 2M-INTL
FREQUENCY
CHANNEL
10. Choose appropriate item and press the [ENT] key. (See page 4-6 for details for how to enter
frequency and channel.)
11. Press the [ENT] key to open the DSC FREQ menu.
* Message file entry
CALL TYPE
GROUP ID
COM. TYPE
COM. FREQ
DSC FREQ
: INDIVIDUAL
: 001234567
: TELEPHONE
: NO INFO
: 2M-INTL
6 MHZ
8 MHZ
12 MHZ
4 MHZ
2 MHZ
16 MHZ
18 MHZ
22 MHZ
25 MHZ
OTHER
MANUAL
Use to scroll
menu.
OTHER: Special, private channels.
MANUAL: For selection of frequency at
radiotelephone when there is "remote control
error."
12. Select appropriate DSC band and press the [ENT] key. Select appropriate DSC frequency
and press the [ENT] key.
13. Follow “How to Enter File Name and Number” on page 6-3 to enter file name and number.
Note: Your ship’s group ID will be as registered as entered in step 6 of this procedure.
6.3 Preparing Geographical Area Call Messages
1. Press the [#/SETUP] key to open the Setup menu.
2. Select MESSAGE and press the [ENT] key.
3. Press the [ENT] key to open the CALL TYPE menu.
* Message file entry
CALL TYPE
STATION ID
COM. TYPE
COM. FREQ
DSC FREQ
: INDIVIDUAL
: ---------
: TELEPHONE
: NO INFO
: 2M-INTL
INDIVIDUAL
PSTN CALL
GROUP CALL
AREA CALL
TEST CALL
4. Use or to select AREA CALL and press the [ENT] key.
5. Press the [ENT] key to open the AREA entry window.