Specifications of the dsc/watch receiver dsc-60 – Furuno RC-1500-1T User Manual
Page 412
SP - 6
SPECIFICATIONS OF THE DSC/WATCH RECEIVER DSC-60
1. DSC TERMINAL
(1) Line out
0 dBm (adjustable between -10 dBm and +10 dBm),
600 ohms, balanced
(2) Line in
-10 to +10 dBm, 600 ohms, balanced
(3) Frequency shift
Mark: 1615 Hz, Space: 1785 Hz
(4) Baud rate
100 baud’s ± 30 x 10
-6
(5)
Protocol
Complies with ITU-R Rec.493-9, 541-8, 1082-1
2. GMDSS DSC WATCH KEEPING RECEIVER
(1) Receiving Frequency
For MF spec:
2187.5 kHz
For MF/HF spec:
2187.5 kHz, 4207.5 kHz, 6312 kHz, 8414.5 kHz,
12577 kHz and 16804.5 kHz
(2) Class of Emission
F1B, J2B
(3) Frequency Stability
within ±10 Hz
(4) Intermediate Frequency
1st: 54455 kHz, 2nd: 455 kHz
(5) Selectivity
-6 dB: 270 Hz or more
-30 dB: within ±380Hz
-60 dB: within ±550Hz
(6) RF Input Impedance
50 ohms
(7) Receiving Sensitivity
Better than 0dB
µ
(at error rate within 1%)
(8) Warming-up Time
1 minute (oven 30 minutes)
3. GENERAL WATCH KEEPING RECEIVER (OPTION)
(1) Receiving Frequency
1.6 MHz to 27.5
(2) Class of Emission
F1B, J2B
(3) Frequency Stability within
±10Hz
(4) Intermediate Frequency
1st: 54455 kHz, 2nd: 455 kHz
(5) Selectivity:
-6 dB: 270 to 300Hz
-30 dB: within ±380Hz
-60 dB: within ±550Hz
(6) RF Input Impedance:
50 ohms
(7) Receiving Sensitivity:
Better than 0dB
µ
(at error rate within 1%)
(8) Warming-up Time:
1 minute (oven 30 minutes)