Heat & Glo Fireplace Heat & Glo Fireplace 6000C - Manual (Page 60)

Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev. T • 9/12 60
D. Elevated Hearth Systems
Use the table below to identify the hearth system that will be used. The table will also help identify effects on the various
dimensions. Some hearth systems will elevate the appliance off the floor at a given dimension. For example, if appliance
will be used with a Kenwood Cabinet with Base, the appliance will be elevated 9-1/4 in. The 9-1/4 in. elevation will also
have to be added to the following: Wall penetration referenced in Figure 8.2 (Wall penetration) and Rough Opening Height
(header height) referenced in Figure 5.2. Note: Finished floor thickness should also be considered when determining in-
stallation dimensions.
Note 1. Add dimensions to Wall Penetration (Figure 8.2) and Rough Opening Height (Figure 5.2).
Note 2. Verify Marble Cut Lengths on site prior to cutting.
Note 3. Dimensions assume use of a 3/4 in. Hearth Pad.
MODEL DESCRIPTION PART #
ELEVATED APPLIANCE
DIMENSION
See Note 1
MARBLE LEG CUT
LENGTH
See Note 2
6000
Series
KENWOOD CABINET KDC48DBP 0 33 in.
KENWOOD CABINET W/ BASE KDC48DBP W/ HTKDC48DBP 9-1/4 in. 33 in.
KENWOOD CORNER CABINET KDA48DBP 0 33 in.
KENWOOD CORNER CABINET W/ BASE KDA48DBP W/ HTKDA48DBP 9-1/4 in. 33 in.
KENWOOD MANTEL AFKDMPB 0 (See Note 3) 33 in.
KENWOOD MANTEL W/ BASE AFKDMPB W/ HTKDMPB 9-1/4 in. 33 in.
LUNA SURROUND LUNA-36-GY 1-1/16 in. N/A
8000
Series
KENWOOD MANTEL AFKDMPC 0 (See Note 3) 32-7/8 in.
KENWOOD MANTEL W/ BASE AFKDMPC W/ HTKDMPC 9-1/4 in. 32-7/8 in.