Hitachi 42EDT41A - Manual (Page 63)

63
RGB ON SCREEN DISPLAY
USING THE RGB INPUT
NOTES: • The other functions do not operate while AUTO ADJUST is in progress.
• Allow the Plasma TV to warm up for 20 minutes before performing AUTO ADJUST.
• Select a bright image for display while AUTO ADJUST takes place.
• If AUTO ADJUST terminates unsuccessfully, try AUTO ADJUST again. If AUTO ADJUST fails several times in
succession, try using manual adjustment to adjust Vertical Frequency, Aspect Ratio, Timing Frequency and Picture.
• Always reset AUTO ADJUST when setting new display setting or when changing to a new
external component.
V POSITION
This feature allows you to adjust the vertical position in RGB mode.
Use CURSOR buttons ̇, ̈ to adjust the vertical position.
Press RETURN button to return to previous menu item.
Press MENU to quit.
Horizontal Clock
Vertical Position
Horizontal Position
Auto Adjust
Setup
Select Return Exit
Reset
Clock Phase
0
0
0
0
Reset
Adjust
H POSITION
This feature allows you to adjust the horizontal position of the display.
Use CURSOR buttons ̇, ̈ to adjust the horizontal position.
Press the RETURN button to return to previous menu item.
Press MENU to quit.
Horizontal Clock
Vertical Position
Horizontal Position
Auto Adjust
Setup
Select Return Exit
Reset
Clock Phase
0
0
0
0
Reset
Adjust
Horizontal Clock
Vertical Position
Horizontal Position
Auto Adjust
Setup
Select Return Exit
Reset
Clock Phase
0
0
0
0
Reset
Adjust
HORIZONTAL POSITION, VERTICAL POSITION, HORIZONTAL CLOCK and CLOCK PHASE
for current RGB format are adjusted automatically. AUTO ADJUST
Use CURSOR buttons ̇, ̈ cursors to highlight adjust.
Press the OK button to select AUTO ADJUST.