Hitachi 42EDT41A - Manual (Page 45)

SETUP
45
ON-SCREEN DISPLA
Y
Select this feature to manually tune each channel. Manual
This feature is used to adjust the frequency data for the tuner depending on the user’s preference. Fine Tuning
If set to ON, the power will be turned off when there is no transmission signal and no operation for about 10
minutes in the TV mode. Auto Off
Color System
Name
Channel Number
Manual
Setup
Select Return Exit
Auto
Off
35
Off
----
Skip
NR
Auto Off
Fine Tuning
Manual
Auto Tuning
Setup
Select Return Exit
Off
Fine Tuning
Setup
Select Adjust Return
35
0
Auto Off
Fine Tuning
Manual
Auto Tuning
Setup
Select Return Exit
Off
Use the CURSOR buttons ( ̄, ̆) to select other sub-menu items.
Channel Number Use the CURSOR buttons ( ̇, ̈) to set the channel numbers.
Name Use the CURSOR buttons (
̄, ̆) to edit and enter channel name.
Color System Use the CURSOR buttons ( ̇, ̈) to set and choose between 2 different Color System settings (Auto,
NTSC-M).
Skip Use the CURSOR buttons ( ̇, ̈) to set. If this is set to ON, that channel will be skipped while using the
channel CH+ (
̆) and CH- (̄) buttons. Skip is automatically set to ON for those non-broadcasting channels
after channel search has been made.
NR Use the CURSOR buttons ( ̇, ̈) to set. If this is set to ON, it helps to reduce the noise interference visible
on the screen especially in the weaker signal reception areas.
Use the CURSOR buttons ( ̇, ̈) to adjust frequency data.
Press the Menu button to exit.