Hitachi 42EDT41A - Manual (Page 47)

SETUP
47
ON-SCREEN DISPLA
Y
Use the CURSOR buttons ( ̄, ̆) to select the Video Input.
Use the CURSOR buttons (
̇, ̈) to set the Video Input.
AV1: Auto, HDTV, SDTV/DVD
AV2 (1st Step): RGB, Composite/Component
AV2 (2nd Step): Auto, HDTV, SDTV/DVD
AV4: S-Video,
Composite
Select the Video input that corresponds to the signal mode of the signal from equipment that is connected to the
corresponding video input terminal (AV1, AV2, AV4). Video Input
Audio Input
Video Input
Color System
System
Setup
System 1
Scart Output TV
RGB1 DVI-PC
RGB2 RGB
Auto
Select Return Exit
Color System
AV1 Auto
AV2 Composite/Component
Auto
AV4 Composite
Setup
Select Return Exit
NOTE: The RGB signal will be automatically recognized.
Use the CURSOR buttons ( ̄, ̆) to select the Video Input.
Use the CURSOR buttons ( ̇, ̈) to set the Audio Input.
Select the Audio input that corresponds to the Audio signal from equipment that is connected to the corresponding
audio input terminal (AV1, AV2, AV3, AV4).
Set to TV or monitor.
Set to DVI-PC or DVI-STB.
Set to RGB or Component.
Set to Auto, HDTV, SDTV/DVD
Audio Input
Scart Output
RGB1
RGB2 (1st Step)
RGB2 (2nd Step)
AV3
AV2
AV1
Audio Input
Setup
AV4 Stereo
Stereo
Stereo
Stereo
Select Return Exit
Audio Input
Video Input
Color System
System
Setup
System 1
Scart Output TV
RGB1 DVI-PC
RGB2 RGB
Auto
Select Return Exit
NOTE: If the Audio Input is a monaural sound, set to L/Mono.