Hitachi 42EDT41A - Manual (Page 55)

55
CONNECTING TO A PC (RGB1 or RGB2)
1. Make sure that the display signal of the personal computer to be used is compatible with the specifications of this
device.
See "Product Specifications" concerning the specifications of this device.
2. Make sure that the power switch of the personal computer is turned off.
3. Connect the signal input terminal (RGB 1 or RGB 2) on the rear panel of this device to the display signal output
terminal of the personal computer.
• Use a cable that fits the input terminal of this device and the output terminal of the personal computer.
• Depending on the type of personal computer being connected, the use of an optional conversion adapter or the
adapter provided with the personal computer may be necessary in some cases. For details, refer to the
instruction manual of the personal computer or ask the personal computer manufacturer or your local retail
dealer.
USING THE RGB INPUT