HP Officejet 6000 User Manual
Page 71
Check the device software settings
Print speed is slower when Best or Maximum dpi is selected as the print quality. To
increase the print speed, select different print settings in the device driver. For more
information, see
.
Low ink levels
Check the estimated ink levels in the ink cartridges.
NOTE: Ink level alerts and indicators provide estimates for planning purposes only.
When you receive a low-ink alert, consider having a replacement cartridge available
to avoid possible printing delays. You do not need to replace the ink cartridges until
print quality becomes unacceptable.
The ink cartridges might have insufficient ink. Insufficient ink may cause the printhead to
overheat. When the printhead overheats, the printer slows down to allow it to cool.
Blank or partial page printed
Check the ink levels
The ink cartridges may be running low on ink.
Clean the printhead
Complete the printhead cleaning procedure. For more information, see
. The printhead may need to be cleaned if the printer was turned off improperly.
NOTE: Turn off the HP Printer by pressing the Power button located on the product.
Wait until the Power light turns off before unplugging the power cord or turning off a
power strip. If you improperly turn off the HP Printer, the print carriage might not return
to the correct position causing problems with the ink cartridges and print quality
issues.
Check the media settings
•
Make sure you select the correct print quality settings in the printer driver for the media
loaded in the trays.
•
Make sure the page settings in the printer driver match the page size of media loaded
in the tray.
More than one page is being picked
For more information on paper-feed problems, see
.
There is a blank page in the file
Check the file to make sure there is no blank page.
Something on the page is missing or incorrect
Check the ink cartridges
Make sure the correct ink cartridges are installed and the ink cartridges are not low on
ink. For more information, see
and
Check the estimated ink levels
.
Solve printing problems
67