HP Officejet 6000 - Manual (Page 28)

Load media
This section provides instructions for loading media into the device.
Load Tray 1 (main tray)
1. Lift the output tray.
2. Slide the media guide out to the widest setting.
3. Insert the media print-side down along the right of the tray. Make sure the stack of
media aligns with the right and back edges of the tray and does not exceed the line
marking in the tray.
NOTE: Do not load paper while the device is printing.
4. Slide the media guide in the tray to adjust it for the media size that you have loaded,
and then lower the output tray.
Chapter 3
24 Use the device