HP MediaSmart SLC3760N User Manual

Page 7

vii

■

Outdoor antenna grounding — If an outside
antenna is connected to the television equipment,
be sure the antenna system is grounded so as to
provide some protection against voltage surges
and built-up static charges. Article 810 of the
National Electrical Code, ANSI/NFPA 70,
provides information with regard to proper
grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors,
location of antenna-discharge unit, connection to
grounding electrodes, and requirements for the
grounding electrode.

■

To prevent fire, never place any type of candle or flames on the top or near the TV set.

■

To prevent fire or shock hazard, do not expose this product to dripping or splashing. No objects filled with liquids,
such as vases, should be placed on the product.

■

To prevent fire or shock hazard, do not place the AC power cord under the TV set or other heavy items.

■

Turn off the main power and unplug the AC cord from the wall outlet before handling.

■

Use a soft cloth and gently wipe the surface of the TV panel. Using a hard cloth may scratch the panel surface.

■

Use a soft damp cloth to gently wipe the panel when it is really dirty. (It may scratch the panel surface when
wiped strongly.)

■

If the panel is dusty, use an anti-static brush, which is commercially available, to clean it.

■

To protect the panel, do not use a dirty cloth, liquid cleaners, or chemical cloth to clean it; such materials may
damage the panel surface.

Antenna Grounding

Grounding Component

Electric Service Equipment

Ground Clamps

Ground Clamp

Grounding Conductors (NEC Section 810-21)

Antenna Discharge Unit (NEC Section 810-20)

Antenna Lead in Wire

Power Service Grounding Electrode System
(NEC Art 250, Part H)

Reference