HP MediaSmart SLC3760N - Manual (Page 21)

Setting Up
Setting Up 9
Connecting the TV signal source
The following is an explanation of the types of
connections that are used for a coaxial cable.
■ A 75-ohm system is generally a round cable with
an F-type connector that can easily be attached to
a terminal without tools (sold separately).
■ A 300-ohm system is a flat, twin-lead cable that
can be attached to a 75-ohm terminal through a
300/75-ohm adapter (sold separately).
A: 75-ohm coaxial cable, round
B: 300-ohm twin-lead cable, flat
C: F-type connector
D
MEDIASM
ART A
MEDIASM
ART A
MEDIASM
ART B
MEDIASM
ART B
A1
B1
C2
C1
A2
B2
C3
w
WARNING: Before connecting the TV to any
other electronic device, unplug the TV and
electronic device AC cords from the AC
input at the wall.
n
An F-type connector should be finger-
tightened only. When connecting the RF
cable to the TV set, do not use tools to
tighten the F-type connector, as it may
cause damage to your TV set.
A
B
C