Hitachi VT-DX815A - Manual (Page 72)

PROGRAMMING THE VCR REMOTE TO CONTROL YOUR TV
72
PROGRAMMING THE VCR REMOTE TO CONTROL YOUR TV
The VCR remote control can be programmed to control many TV
brands that are remote controlled.
1 Turn on the TV.
2 Point VCR remote control toward TV.
pic
pic
3 Press and hold the "TV" button.
4 Press the remote button corresponding to your TV brand as shown
in the set-up chart. The TV channel will change to confirm that the
remote control has been set.
TV Brand
Press "TV"
and this
remote button
TV Brand Press "TV"
and this
remote button
TV Brand Press "TV"
and this
remote button
Hitachi 1 Gold star 1 6 Panasonic 1 CH
Zenith 2 Toshiba 7 Mitsubishi CH
Sony 3 Gold star 2 8 Sharp 1 LAST CH
Magnavox 4 Panasonic 2 9 Sharp 2 DISPLAY
Sanyo 5 RCA 0
Note: If your TV brand is not listed on the Set-Up Chart, try all the buttons listed
in the chart until the TV changes channels. If the TV channel does not change,
you won't be able to program the remote for your TV.
Using the VCR remote to control your TV
pic
1 Press the "TV" button on remote control.