Hitachi VT-DX815A - Manual (Page 27)

BASIC CABLE HOOKUP -WITH CABLE BOX [J]
27
BASIC CABLE HOOKUP - WITH CABLE BOX [J]
WITH THIS HOOKUP
YOU CAN......
• WATCH AVAILABLE CABLE CHANNELS
• RECORD AND WATCH THE SAME CHANNEL
YOU CAN'T......
• RECORD ONE CHANNEL WHILE YOU WATCH ANOTHER
ALL CHANNEL SELECTIONS MUST BE MADE AT THE CABLE BOX.
BE SURE TO CONSULT YOUR CABLE BOX MANUAL FOR THE CABLE
BOX OUTPUT CHANNEL.
Hookup J Illustration pic
TABLE J
FUNCTION
CHANNEL SELECTION
VCR indicator
(Press the VCR/TV
mode select button to
turn the VCR indicator
on or off)
TV VCR CABLE BOX
Watch Cable Channels on
TV Select Cable Box
Output Channel Select Channel to
Watch OFF
(TV mode)
Select and Watch Cable
Channels using VCR 3 or 4 Select Cable Box
Output Channel Select Channel to
Watch ON
(VCR mode)
Record and Watch the
Same Channel 3 or 4 Select Cable Box
Output Channel Select Channel to
Watch ON
(VCR mode)
Record One Channel
Watch Another OFF
(TV mode)
Watch Playback of a Tape 3 or 4 ON
(VCR mode)
Switch the RF Channel
When the VCR is on, its video signal can come into your TV on either
channel 3 or channel 4. You need to select the appropriate channel.
• Turn on the power of both the TV and the VCR. Press the ANT. OUT
button on front of the VCR. Pressing the button alternates between RFCH
03 (channel 3) and RFCH 04 (channel 4) in the VCR's display.
Display the channel which is not used by a commercial channel in your
area.