Choosing a mode for audio playback, Special playback effects (cont.) pg. 3, Special playback effects – Hitachi VT-DX815A User Manual
Page 45
SPECIAL PLAYBACK EFFECTS
45
pic
• Press the PLAY button to return to normal playback.
Press REW or F.FWD and hold it; you can search backward or
forward through the tape at a higher speed while viewing it.
• Press PLAY and REW, then hold REW for backward search at a higher
speed.
• Press PLAY and F.FWD, then hold F.FWD for forward search at a higher
speed.
• Release REW or F.FWD to return to normal playback.
• It takes several seconds until a picture appears during D-VHS playback.
SPECIAL PLAYBACK EFFECTS (cont.)
pg. 3
Choosing a mode for audio playback
The VCR records the same audio on both the Hi-Fi and linear tracks on
the tape. The Hi-Fi sound is recorded on separate left and right stereo
channels. Monaural sound is recorded on the linear track.
To enjoy Hi-Fi sound, connect your VCR to a stereo television or
amplifier/receiver using the audio/video jacks (see page 49).
Note: You cannot select Hi-Fi or linear mode during D-VHS playback.
How to select playback audio
pic
1 Press the GUIDE button.
2 Press the (2) button to select the VCR SETUP operation.
VCR SETUP
AUTO
1
BLUE ON
SAP
4
HIFI
5
STEREO
6
OFF
AUDIO SETUP