Hitachi VT-DX815A - Manual (Page 42)

PLAYBACK
42
4 Press the STOP button to end playback.
pic
Rewinding the tape
When the video cassette reaches the end of the tape, the VCR will
stop and automatically rewind the tape.
• If you press the POWER button while the tape is rewinding, the
power will not shut off until the tape has been completely rewound.
You may also rewind the tape manually at any time.
Manual Rewind
pic
1 Press the STOP button to end playback.
pic
2 Press the REW button.
The VCR rewinds the tape all the way to the beginning, then stops.
• Press the EJECT button on the VCR to eject the tape.
pic
PLAYBACK (cont.) pg. 2
Rewinding the tape
Movie Return
If your videocassette has the safety tab removed, the VCR will stop and
automatically rewind the videocassette, eject it, and turn off the power
when it reaches the end of the tape or a blank section of tape which lasts
for more than 30 seconds.
Note: This function works only in PLAYBACK mode, not in RECORDING mode.
To remove noise from the picture
Auto Tracking
The auto tracking feature will start and adjust playback automatically to
eliminate any static lines or picture noise that may appear on the screen:
• when you insert a tape and press the PLAY button,
• when you press the PLAY button on the remote control during playback,
or
• when the playback speed (STD, SP or EP) changes during playback.