Hitachi VT-DX815A - Manual (Page 34)

PRE-TUNING THE VCR TUNER
34
PRE-TUNING THE VCR TUNER
Note: An antenna or cable must be connected to the VCR before you begin this
operation.
Presetting the received channels without using a cable box
(Hookups [A], [B], [C], [D], [E], [F], [G], [H] or [I])
pic
1 Press the POWER button to turn on the VCR.
pic
2 Turn on the TV and select the video channel (3 or 4).
Or, if you are hooked up with an audio/video cable, set the TV to AUX or
VIDEO.
3 Press the GUIDE button.
The main on-screen menu will appear on the TV screen.
MENU
1 DVHS 2 VCR 3
SETUP SETUP CHANNEL
4 5
REVIEW CLOCK
END GUIDE
4 Press the (3) button to select the CHANNEL PRESET operation.
CHANNEL PRESET
1 CHANNEL
2 AUTO CHANNEL SET