Hitachi VT-DX815A - Manual (Page 63)

INSTANT RECORDING TIMER
63
INSTANT RECORDING TIMER
Using the Instant Recording Timer (IRT)
The Instant Recording Timer (REC/IRT button on the VCR) will let you
make a simplified timer recording without having to use the programming
timer. In order to set the IRT properly the clock must be set before
starting.
1 Follow the steps 1 through 5 on "VHS recording step".
2 Press the REC/IRT button twice to indicate the recording time on
the display.
REC/IRT Settings Illustration pic
• You may increase the recording time by 30 minutes each time you press
the REC/IRT button.
• While you are recording, the remaining recording time is shown on the
VCR display.
• At the end of your recording, the display will read "0:00", recording will
stop automatically, and the VCR will turn itself off.
To stop recording while in the IRT mode:
1 Press the POWER button.
2 Press the STOP button within 10 seconds.
pic
• This can be done either on the VCR or with the remote control.