Basic cable hookup [h, With this hookup – Hitachi VT-DX815A User Manual

Page 25

BASIC CABLE HOOKUP [H]

BASIC CABLE HOOKUP [H]

WITH THIS HOOKUP

YOU CAN......
• WATCH AVAILABLE CABLE CHANNELS
• RECORD AND WATCH THE SAME CHANNEL
• RECORD ONE CHANNEL AND WATCH ANOTHER

Hookup H Illustration pic

TABLE H

FUNCTION

CHANNEL SELECTION

VCR indicator
(Press the VCR/TV
mode select button to
turn the VCR indicator
on or off)

VCR

Select and Watch Cable
Channels using TV

Select Channel to Watch

OFF
(TV mode)

Select and Watch Cable
Channels using VCR

3 or 4

Select Channel to Watch ON

(VCR mode)

Record and Watch the
Same Channel

3 or 4

Select Channel to Record ON

(VCR mode)

Record One Channel
Watch Another

Select Channel to Watch Select Channel to Record OFF

(TV mode)

Watch Playback of a Tape 3 or 4

ON
(VCR mode)

Switch the RF Channel
When the VCR is on, its video signal can come into your TV on either
channel 3 or channel 4. You need to select the appropriate channel.
• Turn on the power of both the TV and the VCR. Press the ANT. OUT
button on front of the VCR. Pressing the button alternates between RFCH
03 (channel 3) and RFCH 04 (channel 4) in the VCR's display.
Display the channel which is not used by a commercial channel in your
area.