Hitachi VT-DX815A - Manual (Page 50)

VIEWING THE ON-SCREEN DISPLAY
50
VIEWING THE ON-SCREEN DISPLAY
Switching between the clock, time counter and time of
remaining tape
Press the DISP/INFO button while the on-screen display is displayed. The
on-screen display switches in the order below together with the VCR's
display.
pic
On-Screen and VCR Displays Illustration pic
Press the DISP/INFO button to see the clock.
Press the DISP/INFO button a second time to see just the time
counter.
Notes:
• The linear time counter operates only if there is something recorded on the
tape.
• The counter changes to 0:00:00 when the tape is ejected.
Press the DISP/INFO button a third time to see the tape remaining
time.
Note: Immediately after the tape is inserted, "– – : – –" will appear.
2 minutes after playback or recording is started, the tape remaining time is
displayed.
Press the CLEAR/EXIT button repeatedly to switch the type of the tape
used. The correct remaining time will appear.
AUTO: T-120 or shorter tape
T-160: T-140 or T-160 tape
T-180: T-180 tape
T-210: T-210 tape
Notes:
• The tape remaining time is not displayed correctly for a tape without any
recordings or tapes other than T-30/60/90/120/140/160/180/210.
• The remaining time may not be displayed correctly during fast forwarding or
rewinding.
• During D-VHS recording and playback, the above on-screen display will not
appear.