Hitachi VT-DX815A - Manual (Page 51)

INDEX WITH THE TIME COUNTER
51
INDEX WITH THE TIME COUNTER
To find specific sections on a tape
Indexing with the Time Counter
You can set the time counter to memorize a certain point in the video
programming, and you can return to that point automatically.
pic
1 Press the DISP/INFO button two or three times.
The counter will appear in the VCR's display.
pic
2 Begin recording or playing back a tape.
pic
3 At the point that you want to go back to, press the CLEAR/EXIT
button.
This resets the counter to 0:00:00.
pic
4 Press the STOP button when you are done recording or playing
back the tape.
pic
5 Press the REW button to rewind the tape.
pic
It will automatically stop at the spot where you cleared the counter in step
3.
• Press the PLAY button to watch the tape from the selected spot.
Note: Press the DISP/INFO button to turn the counter display off. The selected
spot will stay in memory until you set a new one or until the tape is ejected.