Hitachi VT-DX815A - Manual (Page 64)

DELAYED RECORDING
64
DELAYED RECORDING
Setting the VCR to record later
Note: The cassette safety tab must be in place in order to record.
To re-record on a cassette
which has its safety tab
removed.
Cover the hole with cellophane
tape.
With the delayed recording feature, you can set this
VCR so that it automatically turns on and records
programs whenever you like – without your being
around! You can record a program one time only, or
you can automatically record a show every weekday
or every week at the same time. You can preset as
many as 8 timed recordings at once.
Before you begin
Assemble the information you need for timed recording:
• Be sure that the clock is set to the correct time
• Date and day of the program
• Starting time
• Ending time
• Channel to be recorded
• Blank or erasable videocassette (safety tab intact)
Method for programming a DSS® program for delayed D-VHS
recording
• Insert a D-VHS tape into the VCR.
• Connect the VCR and DSS® box via a digital A/V cable.
• Use the DSS® box to select the program for delayed D-VHS recording.
(Refer to the DSS® box manual.)
• Turn off the VCR.
Note: Any section guarded against copying (where a copy protect signal is
inserted) will be recorded in the VHS format.
Delayed Recording Steps
You set up the delayed recording using the on-screen Easy Guide
System.
1 Insert blank or erasable tape.